The use of Bricks or Pavers to create a walkway or patio area complements a home in a method that is unmatched. In addition, installing a Brick or Paver walkway does not always require a pro.
The key to installing a Brick or Paver Walkway is to first properly prepare the location where the bricks/pavers are to be set up. In addition, string lines should be strung on each side of the pathway.
Once the location has been dug down, 3/4" gravel stone ought to be laid in and tamped down firmly. 2" of sand, or stone dust need to be spread out over the gravel. Again the sand/stone dust should be tamped down. Stone dust is preferred. The height in between the tamped down sand and the stringline ought to equate to the density of the brick or paver.
Now that you have a steady base, put a 1" pipe or journal board the length of the pathway on either side of the pathway. Utilizing a flatedge, e.g. a 2"x4" board, slide it over the two lengths of the pipe/ledger board. In doing this you will produce a level surface area to lay the bricks/pavers.
Now put on the level sand/stone dust strips of plastic brick borders. Install a run on both sides of the prepared location. These strips will function as your walkway border and help to maintain the integrity and shape of the pathway. You can get these plastic strip borders at the majority of home improvement stores. here The strips need to be anchored down with 12" galvinized nails. You should sink these nails into the ground and through the strips every foot.
The key to laying the bricks/pavers is to make sure that they interlock with each other. Always stagger adjacent rows of bricks by 1/2 of a brick to interlock them. This will again assist preserve the integrity of the walkway.
Undoubtedly bricks/pavers will need to be cut or divided when building the sidewalk. To really cut/split the brick/paver, lay it in a bed of sand and location the chisel at a 75 degree angle over the area where you want to break the brick. If your sidewalk has curves you will need to buy/rent a wetsaw.
After setting up the bricks, develop the outdoors edges with additional sand, and after that shovel in the topsoil and pack down securely.
Finally, spread stone dust over here the new sidewalk and sweep into the fractures. Repeat this process a number of times to make sure the cracks are totally filled. This will complete the interlocking of the bricks and help to remove any weed growth. Simply include turf seed to the outdoors edges and you should have a stunning entrance to your home within a number of weeks.
In addition, installing a Brick or Paver sidewalk does not always require a pro. The key to setting up a Brick or Paver Walkway is to first appropriately prepare the location where the bricks/pavers are to be installed. Now that you have a stable base, put a 1" pipe or journal board the length of the sidewalk on either side of the sidewalk. These strips will act as your walkway border and aid to maintain the integrity and shape of the walkway. Inevitably bricks/pavers will require to be cut or divided when constructing the walkway.